- Operator controls
- Multi axis joysticks
- Robust Joystick J4 Base
- Technical data
- Configurator
Rate this product
Rate this product
Technical specifications
- Robust joystick for installation from above
- Space-saving design
- High reliability and long service life thanks to contactless Hall-effect and reed technology
- Available with different output signals: analogue, redundant, CAN bus connection (CANopen/SAEJ1939) or with switching output
- IP67 protection class of electronics, ideal for harsh environmental conditions
- Deflection ±20°
- Available with various actuation types: no-detent, detent, with friction brake or centre position interlock, any functioncan be optimally operated
- Designed for extremely heavy loads (x-/y-axis: 2000 N, z-axis: 700 N at 190 mm lever length each)
Robust, top mounted.
The J4 robust joystick is ideal for high-stress and high-frequency use thanks to its robust design. It was designed for use in mobile machinery, such as wheel loaders for operating the bucket functions.
Configure online nowConfigure online now
Download all- Download product data sheet
- Recommend product by e-mail
- Contact to a person in charge
Technical drawing
1/3
Full screen
1/3
2/3
Full screen
2/3
3/3
Full screen
3/3
Article characteristics
- Electrical data
- J4A6...
- J4C6...CANopen
- J4C6...SAE_J1939
- Electrical data
- Polarity reversal protection
- Output signal min.
- Output signal max.
- Output signal
- Output signal - centre position/zero position
- EMC immunity (Norm)
- EMC emission (Norm)
- Operating voltage min.
- Operating voltage max.
- Current consumption
- Load resistance min.
- Short-circuit resistance to GND
- Short-circuit resistance to supply
- Technology
- Protocol
- Transmitting cycle
- Baud rate
- Bus terminating resistor
| Attribute | J4A6... | J4C6...CANopen | J4C6...SAE_J1939 |
|---|---|---|---|
| Bestellung | |||
| Polarity reversal protection | yes | – | |
| Output signal min. | 0.5 V DC | – | |
| Output signal max. | 4.5 V DC | – | |
| Output signal | analogue | – | |
| Output signal - centre position/zero position | 2.5 V DC | – | |
| EMC immunity (Norm) | DIN EN 13309, DIN EN ISO 14982 | – | |
| EMC emission (Norm) | DIN EN 13309, DIN EN ISO 14982 | – | |
| Operating voltage min. | 4.5 V DC | 9 V DC | |
| Operating voltage max. | 5.5 V DC | 36 V DC | |
| Current consumption | max. 15 mA | < 120 mA | |
| Load resistance min. | 20000 Ohm | – | |
| Short-circuit resistance to GND | yes | – | |
| Short-circuit resistance to supply | yes | – | |
| Technology | Hall | ||
| Protocol | – | CANopen | J1939 |
| Transmitting cycle | – | 100 ms | |
| Baud rate | – | 250 kBit/s | |
| Bus terminating resistor | – | no | |
- Mechanical data
- J4A6...
- J4C6...CANopen
- J4C6...SAE_J1939
- Mechanical data
- Max. lever load with specified lever length
- Deflection
- Service life, mechanical (Cycles)
| Attribute | J4A6... | J4C6...CANopen | J4C6...SAE_J1939 |
|---|---|---|---|
| Bestellung | |||
| Max. lever load with specified lever length | 190 mm / 2000 N | ||
| Deflection | ± 20 ° | ||
| Service life, mechanical (Cycles) | 2000000 | ||
- Environmental conditions
- J4A6...
- J4C6...CANopen
- J4C6...SAE_J1939
- Environmental conditions
- Protection class, electronic
- Operating temperature min.
- Max. operating temperature
- Min. storage temperature
- Max. storage temperature
| Attribute | J4A6... | J4C6...CANopen | J4C6...SAE_J1939 |
|---|---|---|---|
| Bestellung | |||
| Protection class, electronic | IP67 DIN EN 60529 | ||
| Operating temperature min. | -25 °C | ||
| Max. operating temperature | 85 °C | ||
| Min. storage temperature | -40 °C | ||
| Max. storage temperature | 85 °C | ||
- Installation
- J4A6...
- J4C6...CANopen
- J4C6...SAE_J1939
- Installation
- Installation
- Mounting type
| Attribute | J4A6... | J4C6...CANopen | J4C6...SAE_J1939 |
|---|---|---|---|
| Bestellung | |||
| Installation | from above | ||
| Mounting type | screwed from above | ||
- Connection
- J4A6...
- J4C6...CANopen
- J4C6...SAE_J1939
- Connection
- Connector type
- Cable type
- Cable length
| Attribute | J4A6... | J4C6...CANopen | J4C6...SAE_J1939 |
|---|---|---|---|
| Bestellung | |||
| Connector type | Mini-Fit Jr. | – | |
| Cable type | FLRY | ||
| Cable length | 0.3 m | – | |
Consultants are available worldwide to answer your questions. In close cooperation with you, we develop operating solutions tailored precisely to your vehicle or machine and manufacture them in small or large series.
Suitable system components
Joystick Handle 361G/362G
- 361G... right handed
- 362G... left handed
- 362G... left handed
View
Joystick Handle 341G/342G
- 341G... right handed
- 342G... left handed
- ergonomic
View
Molex Mini-Fit L2.D00.A
- Suitable for elobau standard joysticks
- Number of connection poles selectable
View
Similar products
Compact Joystick J2 with 321 G Handle
- With up to 6 push button switches
- or 1 thumbwheel and 4 push button switches
- Bottom mount
View
Compact Joystick J2 with Standard Handle
- Up to 3 push button switches
- Bottom mount
View
Robust Joystick J4F
- with safety electronics
- top mount
View
We focus on public welfare economics and recycling management
Sustainability at Elobau
elobau Newsletter
Sign up for the elobau newsletter.Our quarterly newsletter will update you about our products, trade fairs and company news.
Register now
en
Registration in 2 steps
1. Fill in the fields and submit the form to receive a confirmation email.
2. Click on the link in the confirmation email. You will only receive the elobau newsletter with this confirmation.
Your consent can be revoked at any time, e.g. within the footer of the newsletter.
I am interested in the following newsletter:
Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.
I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circ*mstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.
The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
All entries marked with a * are mandatory.
