Synergy Wood® enhances the natural beauty of solid wood with a rich selection of finishing options.
Synergy Wood® enhances the natural beauty of solid wood with a rich selection of finishing options. These prefinished, end-matched tongue and groove boards are perfect for accent walls or ceilings. Each species comes in a wide variety of stain colors, grades, and edge profiles to match the look of any project and create a warm and inviting space for our customers to enjoy for years to come.
Synergy Wood® uses only 100% kiln-dried, solid wood which is sustainably sourced and harvested. Using real solid wood from different species means our planks will have variations in grain color and pattern, as well as knot structure—everything nature intended. Synergy Wood® takes wood quality very seriously and hand selects and re-grades each piece as it enters their plant.
Save time and money with Synergy Wood® products. The professional factory finish saves countless hours of installation time and yields a more professional end result. The end-matched planks come with a tongue and groove on the ends so you don’t have to worry about cutting each piece to land on a rafter or furring strip.
Decades’ of experience and proprietary processes have earned Synergy Wood® the reputation as leading expert in prefinished wood. Since 2007, Synergy Wood® products have been installed in a multitude of environments spanning a variety of markets, from single- and multifamily residential to commercial, retail and hospitality, throughout the nation.
T&G 101: What is V-Joint, Nickel Joint and Square Edge?
All Synergy Wood products are made with tongue and groove joints. Tongue and groove is the preferred method of fitting our wood boards together, edge to edge. Tongue and groove joints allow two wood planks to be joined strongly together to make a single flat surface and conceal the effect of wood shrinkage. "Tongue and groove" is often abbreviated as T&G.
Each piece has a slot (the groove) cut all along one edge, and a thin, deep ridge (the tongue) on the opposite edge. The tongue projects a little less than the depth of the groove. Two or more pieces fit together closely.
Our wood boards are also end-matched. This method eliminates the need for additional joints, face nailing or the use of joints on framing.
V-JOINT:
The term "V-Joint" comes from the "V" created when two of our T&G boards come together. They form a V between the two boards. The T&G V-Joint pattern is used in our very popular Synergy Collection. The V-Joint pattern is often used in our wood ceiling applications.
NICKEL JOINT "SHIPLAP" LOOK
The term "Nickel Joint" or Nickel Gap" comes from the old craftsmen using actual nickels to space the wood - the width of a nickel. Our T&G profile has a square edge profile with a 1/8″ gap between the boards to ensure a seamless nickel gap. Nickel gap also gives the appearance of Shiplap but with a much stronger joint, ability to blind nail (hide the nails behind joint) and still have end-matching. Nickel joint is a clean look that is often used on wood walls and in replace of a shiplap look.
SQUARE EDGE:
"Square Edge" joint pattern allows the wood to butt up close to each other. Often referred to as a "butt joint" Square Edge removes larger gaps like the Nickel joint or V-Joint. Synergy Wood uses Square Edge joint patterns on our rustic or brushed wood products. With a rough sawn board, square edge can give the look of a slight gap and added dimension. Very popular for our interior wall boards.
Synergy Wood® Southern Pine
Premium, handcrafted, prefinished Southern Pine T&G ceiling and wall boards. Southern Pine’s strength, value and wood grain pattern provide for an excellent and sustainable wood choice for your wall and ceiling.
Shop Synergy Wood® Southern Pine
Synergy Wood® Red Grandis™
Red Grandis™ is a premium tropical hardwood valued for its consistent color and durability. It has a naturally beautiful grain pattern with a uniform texture.
Shop Synergy Wood® Red Grandis™
Synergy Wood® E-Peck®
Proprietary E-Peck® process creates the natural and desirable pecky appearance.
Shop Synergy Wood® E-Peck® Southern Pine Shop Synergy Wood® E-Peck® Red Grandis™
Synergy Wood® manufactures prefinished wood paneling for ceilings and walls used by homeowners and contractors - reducing the many challenges of finishing wood at the jobsite. Red Grandis. Red Grandis is a premium tropical hardwood valued for its consistent color and durability.
CYPRESS. Living in Florida, we experience not only harsh weather but many insects. With this in mind, you want to use a wood that can last a lifetime. Cypress is naturally resistant to decay, harsh weather and insects, which makes it the perfect choice.
SYNERGY WOOD® products are covered by a five (5) year, limited warranty. The warranty begins on the date of manufacture. This warranty covers any defects in the coatings or workmanship of the coatings. Any item determined to be defective by a Synergy Wood Products representative will be replaced at no charge.
Simply get the length and width of your ceiling using a simple tape measurement. As long as the length is no longer than 2600mm, you can simply divide the width of your ceiling by the panel width to work out how many you would need.
First, wood is susceptible to water damage and can warp, crack, or rot if exposed to too much moisture. Fire is another potential danger. Some buildings require materials to be incredibly fire resistant, making wood a potential no-go for your facade.
Wood ceilings shine in a wide range of rooms throughout the house: They'll look excellent in the living room, dining room, kitchen, primary bedroom, and even in the bathroom. Wood ceilings are often left in their natural state, but can be painted as well.
In conclusion, Plantation Teak, Tigerwood, Pecky Bolivian Walnut, Ipe, and Cumaru stand out as the best woods for porch ceilings in 2023. They promise durability, elegance, and excellent value for money.
Teak. Teak is the king of durable, outdoor woods. It's extremely rot resistant, reasonably dense and straight-grained, will not warp or crack over time, and has an attractive appearance.
Synergy Tire hereby warrants that every new Synergy MTR tire is free from defects in workmanship and material for the life of the original tread less 2/32” at which point the tire is considered to be fully worn out.
Our lifetime-limited warranty covers ground contact and above-ground pressure-treated lumber. Selecting the correct type of lumber is crucial for the longevity of your project and wallet.
YellaWood® brand products carry a Lifetime Residential and Agricultural Limited Warranty against structural damage caused by fungal decay and termites for above ground, ground contact and fresh water contact applications.
The size of the ceiling and the material chosen for the replacement ceiling will affect the price. For small areas, the labour costs for replacing ceilings can range from R1000 to R3000, and for larger areas, they can range from R3000 to R10000.
According to the National Building Code (NBC), the standard ceiling height is ninety-six inches, or eight feet; for suspended ceilings; the minimum height is ninety inches, or seven and a half feet.
Thicknesses of plasterboard can range between 9mm and 102mm, depending on the type of board you require. Standard plasterboard thicknesses for ceilings are usually 9.5mm to 12.5mm, while walls can be 12.5mm to 15mm.
Durable and resilient: Wood wool panels are durable and resistant to wear and tear, making them suitable for high-traffic areas. They also have good thermal and humidity regulation properties, which contribute to their longevity.
Metal ceilings are strong and durable and can resist wear and tear in the long run perfectly. They are low maintenance and do not fall prey to cracks or warping with passage of time. Metal ceilings are fire resistant, making it perfect for commercial spaces.
Address: Apt. 203 613 Huels Gateway, Ralphtown, LA 40204
Phone: +2135150832870
Job: Regional Design Producer
Hobby: Nordic skating, Lacemaking, Mountain biking, Rowing, Gardening, Water sports, role-playing games
Introduction: My name is Fredrick Kertzmann, I am a gleaming, encouraging, inexpensive, thankful, tender, quaint, precious person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.